I cannot mount the keypad BR 5010 properly. Keypad cannot be attached to the door surface, what to do?

When the input unit is being changed on the safe with the lock EM3520 - that means that the input unit is rotatable, the lock from the inside of the door has to be removed.

Follow the steps below:

1. Remove the cover from the back of the door.

2. Dismount the lock (4 screws in the corners of the lock).

3. Install the input unit according to the manual - make sure that the cable is properly placed in the spindle.

4. Mount the lock back.

5. Test functionality - ALWAYS TEST THE INPUT UNIT WHEN THE DOOR IS OPEN.

6. Mount the door cover back.