How can I bolt the safe myself?
Need help choosing?
Our security advisors help businesses, schools and government buyers every day.
Safes · Product Support· Reviewed by SafeGear advisors
Be aware that there is no wiring or piping in the location where you want to install the safe.
Follow these steps to bolt your safe:
1. Place the safe onto its final position. Read this guide if you are unsure where to place the safe.
2. Mark the spot on the floor or the wall where the bolting holes are located.
3. Move the safe aside.
4. Make sure you use the right drill for the material and an appropriately sized drill bit.
5. Drill holes into the designated marks.
6. Reposition the safe over the mounting hole.
7. Insert the bolt through the inside of the safe into the hole.
8. Tighten up the nut of the bolt.
If you want to bolt the safe inside your wardrobe and your wardrobe has a wooden back, we strongly recommend to avoid any excess space between the safe and the back wall. Best way is to cut a hole in the backside of the wardrobe corresponding to the size of the safe.
Our security advisors help businesses, schools and government buyers every day.